Specifications

2-24
Compensation is added directly to the signal level
measurements. You can use this to compensate for losses
associated with probe points found on certain amplifiers. The
default is the Probe Compensation value specified in Configure.
Enter a different value if necessary. Press OK soft key to
continue.
Results File Name
Enter the name you want to use for the results file that is
created. Your MS1400 will let you know if there is already a
results file with the name that you enter. If desired, you can
overwrite an existing file of the same name. When you are ready
for the next step, press OK soft key.
Type of Test
Tests can be executed immediately or scheduled over a period
of time. Press the Up/Down Arrows to select the type of test
you want and then press OK soft key.
Set Schedule
This screen will appear only if you have selected a scheduled
test. The default schedule will perform over four intervals during
a twenty-four hour period beginning at the present time and date.
If you require a different schedule, press the Up/Down Arrows
to edit the schedule and then press OK soft key.
Temperature