Specifications

1-30
IMPORTANT: You may find an enabled
channel that is not in your channel plan. This
should be disabled. A channel may be missed
if the frequency is special or level too low
(<10dBmV).
IMPORTANT: You must enable a channel to
perform measurements on it.
Channel Plan Parameters/Characteristics to edit
The Configure- Edit Channel screen lists the following
parameters/characteristics:
· ENABLED
· TYPE
· FREQ (MHz)
· CHANNEL NUMBER
· LABEL
· CARRIER
· CENTER FREQ (MHz)— Digital
· MEAS BW (MHz)— Digital
· PACKAGE
· TAGGED
· SCRAMBLED