User Guide

ACTsmart Operating and Installation Manual Rev. 1.2
8
Adding a Card Batch using the keypad:
Step Keypad Entry Operation
1 16 Add Card Batch
2 Enter 10-digit card 10-digit First Card number with leading zeros.
number Eg. Card 54321 enter 0000054321.
3 Enter 10-digit card number Last Card number
4 1-8, (optional)* Select each door this Card is deleted from
5 Press
✔
End Adding Card Batch
Deleting a Card or Card and PIN using the keypad:
Step Keypad Entry Operation
1 17 Delete Card or Card and PIN
2 Enter 10-digit card number 10-digit Card number with leading zeros.
Eg. Card 54321 enter 0000054321.
3 1-8, (optional)* Select each door this Card is deleted from
4 Press
✔
End deleting Card (Card and PIN)
Step Keypad Entry Operation
1 20 Set Door Relay Time - (default 5 seconds)
2 Enter 3 digit time 000-255 seconds - (leading zeros required). Eg. 009 for 9 seconds
3 1-8 (optional)* Select each door this timer is set for
4 Press
✔
End setting Door Relay Timer
Set Door Relay Time:
Step Keypad Entry Operation
1 21 Set Door Ajar Time - (default 30 seconds)
2 Enter 3 digit time 000-255 seconds - (leading zeros required).
3 1-8 (optional)* Select each door this timer is set for
4 Press
✔
End setting Door Ajar Time
Set Door Ajar Time:
Set Guest Buzzer Time:
Step Keypad Entry Operation
1 22 Set Guest Buzzer Time - (default 2 seconds)
2 Enter 3 digit time 000-255 seconds - (leading zeros required).
3 1-8 (optional)* Select each door this timer is set for
4 Press
✔
End setting Guest Buzzer Time
Change Programming Code:
Step Keypad Entry Operation
1 23 Change Programming code
2 0001-9999 New 4 - 8 digit programming code
Change Number of PIN Digits:
Step Keypad Entry Operation
1 24 Change Number of PIN digits
2 4-8 Select number of PIN digits in range 4 to 8. When set, the codes require
leading zeros Eg. Code 9999 becomes 009999 for 6 digits.