User Guide

ACTsmart Operating and Installation Manual Rev. 1.2

30 Second Programming Guide

(For typical Standalone System)

1. Enter Programming Mode.

Press

✘

button followed by the programming code (default is 9999)

The LED will flash amber.

2. Add a Batch of Cards

Press 10, then present the first card in the batch followed by the last card in the batch.

Press

✔

button to complete.

3. Set Desired Door Relay Active Time

Press 20, and then enter the desired number of seconds from 000-255 (three digits with

leading zeros). Press

✔

button to complete.

4. Change Programming code

Press 23, then enter new 4-digit programming code.

5. Exit Programming Mode

Press the

✘

button. The LED turns red.

The ACTsmart is now ready for normal use.

Note: The ACTsmart may be returned to its factory default condition at any time by entering the

programming mode and pressing 80 followed by the

✔

button.

For information on programming the advanced features and networking the ACTsmart range, please

refer to the complete programming guide.

Unit C1, South City Business Centre,

Tallaght, Dublin 24, Ireland.

Tel: 353-1-4662570 Fax: 353-1-4520427 UK Locall: 0845 300 5204

Web: http://www.accesscontrol.ie E-mail: sales@ accesscontrol.ie