User Guide

ACTSmart2 Operating and Installation Manual Rev. 1.1

30 Second Programming Guide

ACTSmart2 PIN Only (1090)

1. Enter Programming Mode.

Press

✘

button followed by the programming code (default is 9999)

The LED will flash amber.

2. Add a PIN Code

Press 12, and then enter a 4-digit PIN code.

Press

✔ button to complete.

3. Set Desired Door Relay Active Time

Press 20, and then enter the desired number of seconds from 000-255 (three digits with

leading zeros). Press ✔ button to complete.

4. Change Programming code

Press 23, then enter new 4-digit programming code.

5. Exit Programming Mode

Press the

✘

button. The LED turns red.

Note: The ACTSmart may be returned to its factory default condition at any time by entering the

programming mode and pressing 80 followed by the ✔ button.

For information on programming the advanced features and networking the ACTSmart range, please

refer to the complete programming guide.