User Guide

ACTpro mifare®
mifare Card Readers
Specification
ACTpro mifare 1KB Fob
Mifare S50 1k fob with a maximum read
range of 3 centimetres
Reader Compatibility
The ACTpro mifare readers support the mifare classic protocol and are
compatible with any card that uses the following IC:
PHILIPS MF1 S50
PHILIPS MF1 S70
PHILIPS MF0ICU10*
PHILIPS MF0ICU11*
INFINEON SLE 66R35
*serial number only
ACTpro mifare 1KB ISO Card
Suitable for ID printing with Mifare S50 with
a maximum read range of 5 centimetres
ACTpro mifare USB Reader
The ACTpro mifare USB reader may be used
to enrol mifare cardholders on ACT Win pro*
software and is also capable of creating
programming cards for sites that use
non-ACT mifare cards.
*requires ACTWin pro 2.3 or later
Ordering Information
Access Control Technology Unit C1, South City Business Park, Tallaght, Dublin 24, Ireland.
t: 353 (0) 1 466 2570. f: 353 (0) 1 452 0427. e: [e-mail]. w: www.accesscontrol.ie
Proximity Serial /
Sector Reader
Pin & Proximity Serial /
Sector Reader
mifare 1K Batch
ISO Card
mifare 1K Batch Fob
USB mifare Reader
ACTpro mifare 1040
ACTpro mifare 1050
ACTpro mifare 1KB ISO Card
ACTpro mifare 1KB Fob
ACTpro mifare USB Reader
Comparison chart
Feature
Proximity
Keypad
Selectable Serial / Sector Reader
mifare
®
ISO 14443A Compatible
8 - 16 V DC operation
Connector Block
IP rating
Potted Electronics
ACTpro mifare 1040
Yes
No
Yes
Yes
Yes
Yes
IP67
Yes
ACTpro mifare 1050
Yes
Yes
Yes
Yes
Yes
Yes
IP67
Yes
Product Specification
Operating Voltage: 8 - 16 Volts DC
Current Consumption: Typ 70mA Peak 140mA
Weight: 170 grams
Operating Temperature: -20 to +50 C
Dimensions (HxWxD): 110 x 100 x 35 mm
Mounting: Surface or Flush
Installation: Indoor/Outdoor (IP67)
Cabling: Connector blocks
Cabling Chart
From To Cable Restriction
Reader Controller 8 core
screened
Belden
9504 or
equivalent
100m at
+12volts
ACTpro mifare 1040
Proximity Only
ACTpro mifare 1050
Proximity & Keypad
ACTpro mifare Fob
ACTpro mifare ISO card ACTpro mifare USB Reader