SDS

US. ACGIH Threshold Limit Values
Value
TypeComponents
TWA 2.5 mg/m3Sodium fluoride (CAS
7681-49-4)
US. NIOSH: Pocket Guide to Chemical Hazards
Value
TypeComponents
TWA 2.5 mg/m3Sodium fluoride (CAS
7681-49-4)
Biological limit values
ACGIH Biological Exposure Indices
Value
Sampling TimeDeterminant SpecimenComponents
3 mg/l Fluoride Urine
*
Sodium fluoride (CAS
7681-49-4)
2 mg/l Fluoride Urine
*
* - For sampling details, please see the source document.
Explosion-proof general and local exhaust ventilation. Good general ventilation (typically 10 air
changes per hour) should be used. Ventilation rates should be matched to conditions. If
applicable, use process enclosures, local exhaust ventilation, or other engineering controls to
maintain airborne levels below recommended exposure limits. If exposure limits have not been
established, maintain airborne levels to an acceptable level. Provide eyewash station.
Appropriate engineering
controls
Individual protection measures, such as personal protective equipment
Applies only to the product when used in an industrial setting. Wear safety glasses with side
shields (or goggles).
Eye/face protection
Skin protection
Applies only to the product when used in an industrial setting. Wear protective gloves.
Hand protection
Skin protection
Applies only to the product when used in an industrial setting. Wear suitable protective clothing.
Other
Applies only to the product when used in an industrial setting. If engineering controls do not
maintain airborne concentrations below recommended exposure limits (where applicable) or to an
acceptable level (in countries where exposure limits have not been established), an approved
respirator must be worn.
Respiratory protection
Wear appropriate thermal protective clothing, when necessary.
Thermal hazards
When using do not smoke.
General hygiene
considerations
9. Physical and chemical properties
Appearance
Liquid.
Physical state
Clear solution.
Form
Pink.
Color
Bubble gum.
Odor
Odor threshold
Not available.
pH
5.8 - 7.4
Melting point/freezing point
Not available.
Initial boiling point and boiling
range
186 °F (85.56 °C)
Flash point
> 212.0 °F (> 100.0 °C) Closed Cup ASTM D93
Evaporation rate
Not available.
Not applicable.
Flammability (solid, gas)
Upper/lower flammability or explosive limits
Flammability limit - lower
(%)
Not available.
Flammability limit - upper
(%)
Not available.
A
CT Kids Anticavity Fluoride Rinse Bubble Gum SDS US
928462 Version #: 01 Revision date: - Issue date: 13-October-2015
3 / 7