Instruction manual

System Documentation 040-1101-01 Rev C 5/19/2004 Page 21 of 27
Copyright © 2004, All Rights Reserved
Computer BIOS Settings
The Computer Bios settings for the Parallel port must be set correctly in order for the Coin
Inputs and Operator buttons to work correctly with the Joshua OS. If you run into a problem
with the both Coin Inputs and Operator buttons not working, use the PS/2 keyboard provided
with your cabinet to verify the Bios setting on your computer are set correctly.
1. While the computer is powered off, plug the PS/2 Keyboard into the purple colored PS/2
port on the back of the computer.
2. Next power the computer ON, and during the first boot-up screen showing the CPU speed
and memory hit the Delete Key on the keyboard to enter the Bios Setup Menu.
3. Use the arrows keys to scroll down and highlight Integrated Peripherals, press the Enter
button to enter this menu.
4. At the Integrated Peripherals Menu screen us the arrow keys to scroll down the long list of
available options until you find Parallel Port Mode and EPP Select Mode. Use the Page
Up and Page Down keys next to the number pad to scroll through and change each option.
5. Verify and/or change the Parallel Port Mode to EPP and EPP Select Mode to EPP 1.7
when you are finished press the F10 Key to Exit and Save the new Bios Settings.
6. You can now unplug the keyboard from the computer and reboot the computer to
verify the Coin Inputs and Operator buttons are working correctly.