Instruction manual

Page 18 of 27 040-1101-01 Rev C 5/19/2004 System Documentation

Monitor Calibration Test

When you begin the Monitor Calibration Test, use the Select Button to Start the test and

to scroll through each monitor screen test. To exit the Monitor Calibration Test, press

the Operator button. Use each monitor calibration screen test separately to adjust and

fine-tune the picture on your monitor. Each screen is designed to either align the

horizontal and vertical sync, or adjust the white balance, and color hues. If you notice a

color distortion on the monitor; press the degausser button on the Monitor Control Panel

may be necessary to fix the color distortion.

Use the Monitor Control Panel to adjust and fine-tune the picture quality on your

monitor. The Monitor Adjustment Options will display on screen, use the buttons on the

Monitor Control Panel to select, adjust, and set the available options. The Monitor

Control Panel is located under the monitor by the rear cabinet door.