User guide

eWON 500-2001-4001-4002 User Guide - IO Servers Configuration
eWON 500®2001®4001®4002® Version 4_3_0 - User Guide - 10/5/05 - ©ACT'L sa - Page 76
6.2.1 Standard IO server configuration page
When no dedicated configuration page is defined for configuring an IO server, the standard configuration page is used.
Figure 44: Standard IO server configuration page
As you can see in the example above, the standard configuration screen is a simple text edition area. Each parameter is entered on a separate
line, the parameter value is separated from the parameter name by a ':'.
The generic format of a line is:
PARAM_NAME:PARAM_VALUE
Warning: Extra space must be removed.
When using this configuration, you must respect the correct syntax of each parameter and the values for each parameter.
The list of valid parameters, and there corresponding valid values is listed in the corresponding IO server documentation (see following chapters).
Any error that would occur when eWON applies the configuration you have entered would be written to the event file. Please refer to chapter
“Files transfer” on page 118 to see how to get access to the events file.