User guide

eWON 500-2001-4001-4002 User Guide - eWON Configuration
eWON 500®2001®4001®4002® Version 4_3_0 - User Guide - 10/5/05 - ©ACT'L sa - Page 55
• Format Historical Recording File System
• Clear scheduled actions
• Confirm
4.3.8.8 RESET Request
eWON version 4 allows you to perform a reset from a second place inside of its web interface.
This reset page can be reached by following this way from the Main Menu navigation bar: Configuration/System Setup/Storage/Reset
(from the Storage menu):
Figure 33: eWON RESET Request page from the Storage menu
If for any reason you want to restart eWON, then you have just to click on the RESET button, and the reset process will begin.
eWON will be accessible again when restart is complete.
The access to information on the different ways to reset eWON, please refer to chapter “Resetting eWON” on page 26.
Control Description
Format Historical Recording File
System
Validating this checkbox will result in erasing the 3 files that stores eWON internal history,
which means all of the three following controls together in this table.
Erase "Historical Recording" file
Validating the checkbox will result in erasing the binary format ircall.bin file that contains the
binary values of all the Tags that are defined in eWON.
Erase "Events" file
Validating the checkbox will result in erasing the text format events.txt file that contains the
history of all of the (maximum) 762 last events that have been logged in eWON.
Erase "Alarms History" file
Validating the checkbox will result in erasing the text format hst_alm.txt file that contains the
history of the alarms for the Tags that have been defined in the eWON.
Table 33: Format Historical Recording File System controls
Control Description
Clear pending actions
Validating this checkbox will result in erasing from the sstat.htm file the eWON actions that
are not currently in progress, that means all the actions that are complete
(whatever successful or not).
Note: as sstat.htm is a "virtual" file, that means that its information are stored in the volatile
memory from eWON, clearing this file does not impact on the memory file system from
eWON. So that this command is an exception in this page, it has been placed here for
obvious ergonomic reasons.
Control Description
Password required
Your password is required in order to confirm your changes.
Those changes will be validated when you click on the Execute button.
Table 34: Clear scheduled action control