User guide

eWON 500-2001-4001-4002 User Guide - eWON Configuration
eWON 500®2001®4001®4002® Version 4_3_0 - User Guide - 10/5/05 - ©ACT'L sa - Page 47
You will start the callback by using the Callback button or abort (hang up the phone line) by using the "Close PPP Connection" button.
Please check the callback configuration that has been defined in the user's configuration (see screenshot below), especially if you enable the
"Callback on user's request" checkbox in the callback configuration window.
Figure 26: eWON User callback setup
Control Description
Selection of the callback method
Publish IP address EMail
This field allows you to define the destination address by
default that will receive the callback notification.
No-Ip Username
(see http://www.no-ip.com/
)
No-ip is a service that allows you to publish on Internet a
domain name that matches the IP address of your PC
(fix or dynamic type) e.g. [e-mail].
Dynamic DNS password
This field allows you to enter a valid password for the
Dynamic DNS server you want to use.
Dynamic DNS Host name
This field allows you to enter a valid host name for the
Dynamic DNS server you want to use e.g. myewon.
Dynamic DNS Domain name
This field allows you to enter a valid domain name for the
Dynamic DNS server you want to use e.g. no-ip.com.
Table 26: IP address publishing controls