User guide

eWON 500-2001-4001-4002 User Guide - eWON Configuration
eWON 500®2001®4001®4002® Version 4_3_0 - User Guide - 10/5/05 - ©ACT'L sa - Page 37
4.3.6.2 Modem
Warning: depending on eWON's version (c.f. Table on page 233)
4.3.6.2.1 Modem configuration (PSTN modem)
This tab contains the Modem setup of the eWON and stands in a distinct page from Dialup Setup since version 4.
Its appearance differs depending on the type of modem that eWON embeds; if a PSTN modem, then the modem settings page will only content
the Modem Init String field (see figure below):
Figure 21: Modem settings for eWON with PSTN modem
Control Description
Modem Detected
Textual description of the eWON internal modem detected, if available.
The text that displays is always "Internal", followed by the modem type or speed
(i.e. "33600" in the screenshot above).
Modem Init String (Basic
Part)
This string is used to configure and to initialize the modem.
Any change in this string could prevent communications to succeed, for that reason only
qualified users should modify this string.
It can be useful to modify this string i.e. if you install eWON in a country where the telephonic
network is different than in your country
Clearing this string will result to applying a well known default initialization string
(after you have validated your choice by clicking on the Update Modem Settings button.
Table 16: eWON PSTN modem settings controls