User guide

eWON 500-2001-4001-4002 User Guide - Monitoring Web Interface
eWON 500®2001®4001®4002® Version 4_3_0 - User Guide - 10/5/05 - ©ACT'L sa - Page 112
7.1 Real-time screen
Click on the View IO item from the SCADA menu to obtain the list of all eWON Tag names and associated real-time values.
To refresh the value, click again on View IO item.
Figure 66: eWON real-time screen
7.1.1 Change Tag value
As shown in the example above on the second row from the Tag list, if the Tag name is an output and if the user has the right to ‘force output’,
an edit box and an Update link is available.
To change the value of the output just fill the related edit box with the new wanted value and click on the related Update link.
If the Tag is of Boolean type, a combo box with values 0 (zero) and 1 is then displayed.
7.1.2 Alarm state
If the Tag name is in an alarm state, a yellow bell appears at its left side:
You can click on this picture to access directly the Alarm summary screen.
Tag description: The description of the Tag is also displayed for each Tag.