System information

General Reference Guide IO Servers Configuration
RG-001-0-EN ver 1.5 eWON® - 20/03/2009 - ©ACT'L sa Page 87
5.2.4 Standard IO server configuration page
When no dedicated configuration page is defined for configuring an IO server, the standard configuration page is used.
Figure 73: Standard IO server configuration page
As you can see in the above example, the standard configuration screen is a simple text edition area. Each parameter is entered on a separate
line, the parameter value is separated from the parameter name by a colon ':' .
The generic format of a line is:
PARAM_NAME:PARAM_VALUE
Warning: Extra space must be removed.
When using this configuration, you must respect the correct syntax of each parameter and the values for each parameter.
The list of valid parameters and their corresponding valid values are listed in the corresponding IO server documentation (see following chapters).
Any error that would occur when the eWON applies the configuration that you have entered would be written to the event file. Please refer to
chapter “Files transfer” on page 154 to see how to get access to the events file.