System information

General Reference Guide eWON Configuration
RG-001-0-EN ver 1.5 eWON® - 20/03/2009 - ©ACT'L sa Page 66
3.3.4.5.3 Features
Figure 58: Features setup page
There is some “options/restrictions” available on the firmware. To activate these features, you need to enter an “enable code”.
3.3.4.5.4 REBOOT
Figure 59: eWON REBOOT Request page from the Storage menu
If for any reason you want to restart your eWON, then you just have to click on the REBOOT button, and the reboot process will begin.
Your eWON will be accessible again when restart is completed.
For further information on the different ways to reboot the eWON, please refer to chapter “Reboot” on page 15.
Clear scheduled action
Clear pending actions
Validating this checkbox will result in erasing from the sstat.htm file the eWON actions that
are not currently in progress, that means all the actions that are completed (whatever
successful or not).
Note: as sstat.htm is a "virtual" file, which means that its information are stored in the volatile
memory from eWON, clearing this file does not impact the memory file system from eWON.
As this command is an exception in this page, it has been placed here for obvious ergonomic
reasons.
Confirm operation
Password required
Your password is required in order to confirm your changes. Those changes will be validated
when you click on the Execute button.