System information

General Reference Guide eWON Configuration
RG-001-0-EN ver 1.5 eWON® - 20/03/2009 - ©ACT'L sa Page 62
3.3.4.4.2 Default Config
Using this menu, the user can return to the default communication configuration of the eWON. This will NOT modify anything in the other
configurations of the eWON. The IP address will not be modified. This option requires a forced reboot of the eWON (software or hardware).
Also remember that the communication setup is NOT affected by a format of the eWON.
Figure 53: Reset to default COM config
3.3.4.5 STORAGE
The eWON stores configuration and recording data in its flash memory.
The eWON flash memory is divided into areas of different sizes that can be erased and reformatted individually
during a partitioning operation.
note: eWONs have 8, 16 or 32 MB of Flash memory, see table below.
Flash Memory eWON types
8 MB
• eWON500
• eWONx001
• eWON4002
16 MB
• eWONx005
• eWONx101
• eWON4102
32 MB
• eWONx005CD
• eWONx104
Table 39: Flash memory vs eWON type