System information

General Reference Guide eWON Configuration
RG-001-0-EN ver 1.5 eWON® - 20/03/2009 - ©ACT'L sa Page 27
3.3.4.1.1 Modem setup page
Warning: depending on the eWON's version (c.f. Table 187 on page 203)
3.3.4.1.1.1 Modem configuration (PSTN modem)
This tab contains the Modem setup of the eWON and stands in a distinct page from Dialup Setup since version 4. Its appearance differs
depending on the type of modem that the eWON embeds; if a PSTN modem, then the modem settings page will only contain the Modem Init
String field (see figure below):
Figure 23: Modem settings for eWON with PSTN modem
Control Description
Modem Detected
Textual description of the eWON internal modem detected, if available.
The text that is displayed is always "Internal", followed by the modem type or speed
(i.e. “Internal 56K” in the screenshot above).
Modem Init String (Basic Part)
This string is used to configure and to initialize the modem.
Any change in this string could prevent communications to succeed, for that reason only
qualified users should modify this string.
It can be useful to modify this string i.e. if you install eWON in a country where the telephone
network is different than in your country
Clearing this string will result to applying a well known default initialization string (after you
have validated your choice by clicking on the Update button.
Table 18: eWON PSTN modem settings controls