System information

General Reference Guide eWON Configuration
RG-001-0-EN ver 1.5 eWON® - 20/03/2009 - ©ACT'L sa Page 20
3.3.2.6 FTP setup
Figure 18: eWON FTP setup page
After having encoded your parameters, go to the bottom of the page to .
Control Description
Enable NTP clock update
To update the eWON date & time the eWON is able to make a connection automatically on a NTP (Network
Time Protocol) timeserver. If you want to use that functionality, check the box and fill the next edit boxes in.
NTP server address
The IP address of the NTP (Network Time Server Protocol) server. You can easily find a list of NTP servers by
using any Web search engine. If you are working on your own network without a real connection to Internet, we
recommend NTP server software http://www.haytech.com.au/TimeServer/TimeServer.htm
. If you only know the
name of the NTP server (like canon.inria.fr) see the chapter “Finding the IP address of a given host” on
page 200. Note: eWON does not consider the DST data (Daylight Saving Time).
NTP Server Port Usually 123. In case of doubt, contact your Internet provider or your Network Administrator to check it.
GMT Offset
Enter here the offset in hours between your local time zone and the GMT time zone. This information is required
for correct automatic time update.
Update Time Interval Interval in minutes for automatic connection to the NTP Server. Default is 1440= 1 day.
Table 9: eWON NTP controls
After having encoded your parameters, go to the bottom of the page to .
Control Description
FTP server address
The name of the FTP server the Put FTP command is issued from (alarm action or Script direct PUTFTP
command). Enter FTP server IP address. If you only know the name of the FTP server (like domain.com) see the
chapter “Finding the IP address of a given host” on page 200.
FTP server port Usually the value is 21. In case of doubt, contact your Internet provider or your Network Administrator to check it.
User name The FTP client user name defined on the FTP server.
Password The password for the given FTP client.
Use Passive Mode When checked, all FTP transactions are performed in passive mode.
Table 10: eWON FTP setup controls