System information

General Reference Guide Monitoring Web Interface
RG-001-0-EN ver 1.5 eWON® - 20/03/2009 - ©ACT'L sa Page 163
As the Serial Debug uses eWON ressources (CPU and memory), don’t forget to disable the debugging once you don’t need it anymore.
Set the SerDebX to 0 (null) to disable it.
The buffer used to store data in the real time log is limited to 1000 characters, so if an RX or TX data stream is longer than 450 characters, an
error message saying that it is not possible to log it is logged instead
Example: SER-Rx: Too long to print (800)
If the Debug mode is >1 then the ascii values are only logged if there is space, so even if ascii debug is acked, if there is no space, no ascii data
are appended to the hex data.
6.7.4.4 Activate VPN debug mode
Figure 137: Activate VPN debug
The VPN diagnosis can be set to 3 levels or disabled.
6.7.5 ADSL Log
If your ADSL does not work, you may have problems with your configuration. In that case, you can check the ADSL Log, this log is fetched from
the modem itself and remains in 'English'. It may contain information about an invalid VPI/VCI configuration or an incorrect username and
password.