System information

General Reference Guide eWON Configuration
RG-001-0-EN ver 1.5 eWON® - 20/03/2009 - ©ACT'L sa Page 15
3.3.1.4 Reboot
Rebooting eWON is sometimes necessary (i.e. to validate some configuration changes).
Figure 13: eWON system Reboot
eWON version 5 offers three ways to perform a reboot:
• From the Reboot menu from General configuration page
• By using the "REBOOT" Basic command (see eWON programming Manual).
• From the Reboot menu from Storage configuration menu (on page 66)
You will have to wait that the eWON comes back to its normal state after restarting to get access to it again.
Some special operation like “Upgrade the firmware of the Modem” requires a reboot with the BootOp parameter set to a specific value. Use the
Special operation field to select the BootOperation to do. Now, only the Modem Upgrade value is available.