System information

General Reference Guide Monitoring Web Interface
RG-001-0-EN ver 1.5 eWON® - 20/03/2009 - ©ACT'L sa Page 148
6.1 Real-time screen
Click on the View IO item from the eWON Web Interface menu to obtain the list of all eWON Tag names and associated real-time values. To
refresh the value, click again on View IO item.
Figure 111: eWON real time screen
6.1.1 Change a Tag value
As shown in the above example, in the first row from the Tag list, if the Tag name is an output and if the user has the right to ‘force output’, an edit
box and an Update link are available. To change the value of the output just fill the related edit box with the new wanted value and click on the
related Update link.
If the Tag is of Boolean type, a combo box with values 0 (zero) and 1 is then displayed.
6.1.2 Alarm state
If the Tag name is in alarm state, a yellow bell appears at its left side:
You can click on this picture to access directly the Alarm summary screen.
Tag description: The description of the Tag is also displayed for each Tag.
6.1.3 Real time graph
If a real time recording is enabled for a Tag, a small icon will appear next to its name:
This small icon is an hyperlink to show the graph picture. When the link is clicked, another window will open and after a small delay (about 3
seconds), a graph will be displayed:
This graph displays the whole real time window.
Important: If the main explorer window hides the real time window, clicking again on the real time graph hyperlink will not bring it
forward. You should bring it forward manually.