System information

General Reference Guide IO Servers Configuration
RG-001-0-EN ver 1.5 eWON® - 20/03/2009 - ©ACT'L sa Page 113
5.9 ABLOGIX IO Server
5.9.1 Introduction
ABLogix IO server is used to communicate with Allen Bradley Logix Series PLCs on the Ethernet link or on the Serial link (in DF1 protocol).
• It allows the eWON to poll ABLOGIX PLCs in order to read data.
• It allows the eWON to act as EIP-DF1 gateway for remote maintenance of the ABLOGIX PLCs.
• It allows the eWON to poll DH+ device using ControlLogix gateway.
The eWON only allows DF1 communication with devices directly connected to the eWON Serial link (the ABLOGIX PLC may not be located
behind another PLC connected on the DF1 serial link acting itself as gateway).
note: Please check in the “Rockwell compatibility matrix” on page 204 if your device is supported.
5.9.2 Setup
Figure 87: ABLOGIX IO server setup window