System information

General Reference Guide IO Servers Configuration
RG-001-0-EN ver 1.5 eWON® - 20/03/2009 - ©ACT'L sa Page 105
Status, Global Device Address
• You can define a status Tag for each PLC used.
• If you use the status address, the Tag must be configured as analog.
5.6.3.2 Destination Device Type and Address
The Device Address is used in the topic definition or in the Tag definition. If used in the Tag definition, it will be separated from the value name by
a coma (‘,’).
• Format:
DeviceType-DeviceAddress
Only device Types SLC500 or PLC5 are supported.
Device Address is a number between 0 and 254.
example : SLC500-1 or PLC5-22
• Format:
[DeviceType-] IP address [,Port,Link]
example: 10.0.0.80 to access a SLC500
See “DF1 : Ethernet routing” on page 101
0
Communication not initialized. Status UNKNOWN.
If no Tag is polled on that device address, the communication status is unknown.
1 Communication OK.
2 Communication NOT OK.
Table 77: Tag Status meaning