System information

General Reference Guide IO Servers Configuration
RG-001-0-EN ver 1.5 eWON® - 20/03/2009 - ©ACT'L sa Page 99
5.5.3.2 The device address syntax
The Device Address is used in the topic definition or in the Tag definition. If used in the Tag definition, it will be separated from the value name by
a coma (‘,’)
• Network,Station,Gate
or
• Network,Station,Gate,Module,Channel
The second case applies to addresses with 5 levels:
• Network: 0..127
• Station: 0..63
• Gate:
• Module:
• Channel:
Module and channel can be omitted if not required.
If the address is not specified, 0,254,0 will be used.
Important: If an address is specified in a Topic definition it will replace any address defined Tag by Tag.