User's Manual Part 2

T
2
CAS / Part No. 9000000
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
34-43-20
15 Feb 2003
Use or disclosure of information on this page is subject to the restrictions in the proprietary notice of this document.
4--4
Table 4--1. TT--950/951/952 T
2
CAS Computer Unit Interface Description (cont)
Connector Pin
Designation
Functional Description
RMP--3E Spare Pin
RMP--3F, 3G 600 Ohm Audio Output: [RMP --3F (HI), RMP--3G (LO)]
This is a synthesized voice output supplied by the T
2
CAS computer unit. Its level is
programmable up to 80 milliwatts into a 600 Ohm audio distribution system. All aural
traf fic and resolution advisories are annunciated over this output. See RBP--7A for audio
level programming.
RMP--3H Spare Pin
RMP--3J Reserved for TAWS/RWS use.
RMP--3K Reserved for TAWS/RWS use.
RMP--4A Reserved for TAWS/RWS use.
RMP--4B Reserved for TAWS/RWS use.
RMP--4C Reserved for TAWS/RWS use.
RMP--4D TCAS Installed Discrete Output (Ground)
Indicates to external systems that a TCAS Computer is installed.
RMP--4E Reserved for TAWS/RWS use.
RMP--4F Reserved for TAWS/RWS use.
RMP--4G Reserved for TAWS/RWS use.
RMP--4H Reserved for TAWS/RWS use.
RMP--4J Reserved for TAWS/RWS use.
RMP--4K Reserved for TAWS/RWS use.