User's Manual Part 2

T
2
CAS / Part No. 9000000
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
34-43-20
15 Feb 2003
Use or disclosure of information on this page is subject to the restrictions in the proprietary notice of this document.
6--13
CLIMB INH 0000 Climb Inhibit inputs:
RMP--1J, RMP--13G, RBP--5J, RBP--5K.
INC CLIMB INH 0000 Increase Climb Inhibit inputs:
RBP--5E, RBP--5F, RBP--5G, RBP--5H
ADVISORY INH 0000 Advisory Inhibit inputs:
RBP--5A, RBP--5B, RBP--5C, RBP--5D
RADIO ALT TYPE
1
0000 Analog Radio Altimeter Type: RMP--12B
ARINC 552/552A (0), Collins BCA (1)
VOICE DELAY
ENABLE
0 Voice Delay option: RBP--7D
Enabled = (1), Disabled = (0)
AUDIO PROG PINS 000 Audio output level selection inputs:
RBP--7A, RBP--7B, RBP--7C
CANCEL DISCRETE
2
0 Advisory Cancel Discrete option: RMP--3D
(0) allows advisories to be cancelled. A (1) does not allow
advisories to be cancelled.
Selection of code 0005 displays the second of three pages that define the
Program Pins status. See Figure 6--7.
Figure 6--7. Typical Program Pins 2/3 Page
Programming pins on the T
2
CAS computer associated with each of the functions
defined on the Program Pins 2/3 page are listed below. Where more than one
program pin is indicated, the listed connector pins corre spond to the display
digits read from left to right. A one (1) indicates the associated pin is grounded.
Azero(0) indicates open.