User's Manual Part 2

T
2
CAS / Part No. 9000000
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
34-43-20
15 Feb 2003
Use or disclosure of information on this page is subject to the restrictions in the proprietary notice of this document.
4--84
(26) True Display Orientation Left
The T
2
CAS updates the True Display Orientation Left data based on Table 4--21.
The minimum External Sensor input accuracy accepted for True Display Orientation
Left is the same as what is accepted for True Track Angle, True Heading or Magnetic
Heading.
Table 4--21. True Display Orientation Left
If Map Mode Orientation Left indicates: Then True Display Orientation Left =
Track Up T rue Track Angle
Heading Up T rue Heading OR (Magnetic Heading --
Magnetic Variation)
NorthUpOROther INVALID
(27) True Display Orientation Right
The T
2
CAS updates the True Display Orientation Right data based on Table 4--22.
The minimum External Sensor input accuracy accepted for True Display Orientation
Left is the same as what is accepted for True Track Angle, True Heading or Magnetic
Heading.
Table 4--22. True Display Orientation Right
If Map Mode Orientation Right indicates: Then True Display Orientation Right =
Track Up T rue Track Angle
Heading Up T rue Heading OR (Magnetic Heading --
Magnetic Variation)
NorthUpOROther INVALID
(28) Display Range Left/Right
The T
2
CAS Display Range input parameter is updated from the EFIS Control Panel.
The range selections are dependant on the type of Display installed.
The minimum External Sensor input accuracy accepted is 1.0 nmi.