User's Manual Part 2

T
2
CAS / Part No. 9000000
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
34-43-20
15 Feb 2003
Use or disclosure of information on this page is subject to the restrictions in the proprietary notice of this document.
4--72
The GPS Time Mark Output is used to provide an accurate timing reference for
GPS signals. The output has a differential RS--422 signal format.
(3) Programmable Discrete Input/Output Pins
The Discrete signals addressed in this section are APM/ASDB programmable input
and output signals as shown in Table 4--18 and Table 4--19 respectfully. As new
Aircraft configurations/ASDBs are defined, the Discrete signals will be assigned to a
particular input/output per Appendix n (’n’ denotes Appendix’ that are created as new
Aircraft Configurations are defined).
Table 4--18. APM/ASDB Programmable Discrete Inputs
Digital Signal Definition Pin # Notes
Ground Discrete Input #1 RTP--9J GND Disc Input
Ground Discrete Input #2 RTP--9K GND Disc Input
Ground Discrete Input #3 RTP--10A GND Disc Input
Ground Discrete Input #4 RTP--10B GND Disc Input
Ground Discrete Input #5 RTP--10C GND Disc Input
Ground Discrete Input #6 RTP--10D GND Disc Input
Ground Discrete Input #7 RTP--10E GND Disc Input
Ground Discrete Input #8 RTP--10F GND Disc Input
Ground Discrete Input #9 RTP--10G GND Disc Input
Ground Discrete Input #10 RTP--10H GND Disc Input
Ground Discrete Input #11 RTP--10J GND Disc Input
Ground Discrete Input #12 RTP--10K GND Disc Input
Ground Discrete Input #13 RTP--11A GND Disc Input
Ground Discrete Input #14 RTP--11B GND Disc Input
Ground Discrete Input #15 RTP--11C GND Disc Input
Ground Discrete Input #16 RTP--11D GND Disc Input
Ground Discrete Input #17 RTP--11E GND Disc Input
Ground Discrete Input #18 RTP--11F GND Disc Input
Ground Discrete Input #19 RTP--11G GND Disc Input
Ground Discrete Input #20 RTP--11H GND Disc Input
Ground Discrete Input #21 RTP--11J GND Disc Input
Ground Discrete Input #22 RTP--11K GND Disc Input
+28 Vdc Discrete Input #1 RTP--12A +28 Vdc Disc Input