User's Manual Part 2
T
2
CAS / Part No. 9000000
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
34-43-20
15 Feb 2003
Use or disclosure of information on this page is subject to the restrictions in the proprietary notice of this document.
4--63
C. APM/ASDB Configurable Pinout and Pin Description
(1) Programmable Analog Input Pins
T
2
CAS contains generic analog inputs which are used to input a variety of
dynamically assigned analog signals. Most inputs channels can accept a number of
different signal types and are individually selectable b y the APM through the ASDB
database.
The analog signals addressed in this section are APM/ASDB programmable inputs
as shown in Table 4--9. As new Aircraft configurations/ASDBs are defined, the
analog signals will be assigned to a particular input per Appendix n (’n’ denotes an
Appendix assigned as new Aircraft Configurations are defined).
The statically assigned analog signal definitions are addressed in the “TAWS/RWS
Pinout and Pin Descriptions (Non--Configurable)” Section.
Table 4--9. APM/ASDB Programmable Analog Inputs
Analog Signal Definition Pin # Notes
3W Synchro(X) #1 RTP--3J 3W Syncro Input, multiplexed with
A429 receivers
3W Synchro(Y) or 2W(+) #1 RTP--4K 2/3W Syncro Input, multiplexed with
A429 receivers
3W Synchro(Z) or 2W(--) #1 RTP--3K 2/3W Syncro Input, multiplexed with
A429 receivers
3W Synchro(X) #2 RTP--4A 3W Syncro Input, multiplexed with
A429 receivers
3W Synchro(Y) or 2W(+) #2 RTP--4C 2/3W Syncro Input
3W Synchro(Z) or 2W(--) #2 RTP--4B 2/3W Syncro Input, multiplexed with
A429 receivers
3W Synchro(X) #3 RTP--4D 3W Syncro Input, multiplexed with
A429 receivers
3W Synchro(Y) or 2W(+) #3 RTP--4F 2/3W Syncro Input
3W Synchro(Z) or 2W(--) #3 RTP--4E 2/3W Syncro Input, multiplexed with
A429 receivers
3W Synchro(X) #4 RTP--4G 3W Syncro Input, multiplexed with
A429 receivers
3W Synchro(Y) or 2W(+) #4 RTP--4J 2/3W Syncro Input
3W Synchro(Z) or 2W(--) #4 RTP--4H 2/3W Syncro Input, multiplexed with
A429 receivers
3W Synchro(X) #5 RTP--5A 3W Syncro Input, multiplexed with
A429 receivers
3W Synchro(Y) or 2W(+) #5 RTP--5C 2/3W Syncro Input
3W Synchro(Z) or 2W(--) #5 RTP--5B 2/3W Syncro Input, multiplexed with
A429 receivers