User's Manual Part 2

T
2
CAS / Part No. 9000000
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
34-43-20
15 Feb 2003
Use or disclosure of information on this page is subject to the restrictions in the proprietary notice of this document.
4--60
Table 4--8. Operator Selectable Options -- Default Settings(cont)
Operator Selectable
Options
Selectable OptionData Parameter
Mode 6 Volume Level
Enable -- Mode 5 Callout
MODE_6_VOLUME_LEVEL_
ENABLE_MODE_5_CALLOUT
Enable -- Mode 5 Callouts
annunciated at the Mode 6
Volume Level.
Disable -- Mode 5 Callouts
annunciated at the High
Impedance or Low
Impedance Normal Volume
Levels.
QFE Enable QFE_ENABLE Enable -- Indicates QFE
altitude correction is
enabled.
Disable -- QNH altitude
correction is used.
Store GCAM Parameters
Enable
STORE_GCAM_
PARAMETERS
Enable -- Records additional
GCAM parameters when an
Event occurs, for added
diagnostic ability of GCAM
parameters.
Disable -- Records standard
setofGCAMData.
GCAM Event data is stored
for every event,
independent of this setting.
Store GFM Parameters
Enable
STORE_GFM_PARAMETERS Enable -- Records additional
GFM parameters when an
Event occurs, for added
diagnostic ability of Platform
parameters.
Disable -- Records standard
setofGFMData.
TA WS Caution Flash Enable TA WS_CAUTION_FLASH_
ENABLE
Enable -- Caution lamp
flashing for the duration of
the TA WS Caution Event.
Disable -- Caution lamp
solid for the duration of the
TA WS Caution Event.
TA WS Warning Flash
Enable
TA WS_W ARNING_FLASH_
ENABLE
Enable -- Warning lamp
flashing for the duration of
the TA WS Warning Event.
Disable -- Warning lamp
solid for the duration of the
TA WS Warning Event