User's Manual Part 2

T
2
CAS / Part No. 9000000
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
34-43-20
15 Feb 2003
Use or disclosure of information on this page is subject to the restrictions in the proprietary notice of this document.
4--59
Table 4--8. Operator Selectable Options -- Default Settings(cont)
Operator Selectable
Options
Selectable OptionData Parameter
Mode 3 Caution Alert MODE_3_CAUTION 1 = “DON’T SINK, DON’T
SINK”
Mode 4A Caution Alert MODE_4A_CAUTION 1 = “TOO LOW TERRAIN”
or
2 = “TOO LOW FLAPS”
Mode 4B Caution Alert MODE_4B_CAUTION 1 = “TOO LOW TERRAIN”
or
2 = “TOO LOW GEAR”
Mode 5 Caution Alert MODE_5_CAUTION 1 = “GLIDESLOPE”
Mode 6 High Impedance
Volume Level
MODE_6_HIGH_IMPEDANCE_
VOLUME_LEVEL
integer in the range 0 .. 255
( min = 0, max = 255)
Mode 6 Low Impedance
Volume Level
MODE_6_LOW_IMPEDANCE_
VOLUME_LEVEL
integer in the range 0 .. 255
( min = 0, max = 255)
Mode 6 Volume Level
Enable -- Altitude Callouts
MODE_6_VOLUME_LEVEL_
ENABLE_ALTITUDE_
CALLOUTS
Enable -- Altitude Callouts
annunciated at the Mode 6
Volume Level.
Disable -- Altitude Callouts
annunciated at the High
Impedance or Low
Impedance Normal Volume
Levels.
Mode 6 Volume Level
Enable -- Bank Angle
Callouts
MODE_6_VOLUME_LEVEL_
ENABLE_BANK_ANGLE_
CALLOUTS
Enable -- Bank Angle
Callouts annunciated at the
Mode 6 Volume Level.
Disable -- Bank Angle
Callouts annunciated at the
High Impedance or Low
Impedance Normal Volume
Levels.
Mode 6 Volume Level
Enable -- Minimum Callouts
MODE_6_VOLUME_LEVEL_
ENABLE_MINIMUM_
CALLOUTS
Enable -- Minimums
Callouts annunciated at the
Mode 6 Volume Level.
Disable -- Minimums
Callouts annunciated at the
High Impedance or Low
Impedance Normal Volume
Levels.