User's Manual
Table Of Contents
- T3CAS_Section_5
- 5 Adjustment/Test
- 1. General
- 2. Equipment
- 3. Initial Harness Checkout (New Installations Only)
- 4. System Self-Tests
- 5. Return-to-Service Test
- 6. Operational Software Loading Using an ARINC 615A Portable Data Loader or Compact Flash Card
- 7. Downloading Information from the TP3PCAS Using a CF Card
- 1. Obtain a New or Blank Compact Flash (CF) card.
- 2. Copy to the New or Blank CF card the appropriate ‘Header File’
- a) Header files are files copied to the New or Blank CF card that will instruct the computer unit what is desired to be downloaded.
- b) Header files needed to download Maintenance Data, Event Data and CRC Part Numbers can be obtained from ACSS Customer Services at +1-623-445-7070 or crc.acss@l-3com.com.
- 3. For downloading Maintenance Data, Event Data or CRC Part Numbers the aircraft does not need to be in an on-ground configuration.
- 4. Apply power to the computer unit.
- 5. Insert the CF card.
- 6. For ACSS part numbers 9005000-10000, -10101, -10202, and -10204 the DATA STATUS LED will UblinkU green once; this indicates the unit recognized that a CF card was inserted.
- 7. For ACSS part numbers 9005000-11203, -11801 and -55801 the DATA STATUS LED will UblinkU green while reading the header file and performing the action defined in the header file.
- 8. Flight Data Recording
- 1. T3CAS part numbers 9005000-10000, -10101, -10202, and -10204 only support FAT16 CF card formatting. T3CAS part numbers 9005000-11203, -11801 and -55801 support both FAT16 and FAT32 CF card formatting.
- B. Flight Data
- 1. Obtain a New or Blank CF Card.
- 2. Copy to the New or Blank CF Card the Appropriate Header File.
- 3. Header files are files copied to the New or Blank CF card that will instruct the computer unit what is desired to be downloaded.
- 4. For Flight Data Recording, the aircraft does not need to be in an on-ground configuration.
- 5. Apply power to the computer unit.
- 6. Insert the CF card.
- B. Flight Data
- 9. Downloaded Maintenance Data, Event Data And Flight Data May Be Sent To ACSS Customer Services For Analysis
- 5 Adjustment/Test
- T3CAS_Section_6
- T3CAS_Section_7
- 7 Maintenance Practices
- 1. General
- 2. Equipment and Materials
- 3. Procedure for the TP3PCAS Computer Unit
- 4. Procedure for the APM (Not applicable for part numbers 9005000-10000, -10101, -10202, -10204, or -11203)
- 5. Procedure for the Directional Antenna
- 6. Procedure for the Omnidirectional Antenna (Applicable to part numbers 9005000-11203, -11801 and -55801)
- 7. Procedure for the Control Panel
- 8. Procedure for the VSI/TRA Display
- 9. Instructions for Continued Airworthiness, FAR Part 25.1529
- 7 Maintenance Practices
- T3CAS_Section_8
- T3CAS_Section_9
- T3CAS_Section_10
- T3CAS_Appendix_A
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
T
3
CAS/Part No.9005000
Table 4-8: Operator Selectable Options – Default Settings (cont)
Operator Selectable
Options
Data Parameter Selectable Option
Eleview Water
Texture
ELEVIEW_WATER_SLICE_TE XTURE
Not selectable by
customer.
Eleview Rasterized
Text Disable
ELEVIEW_RASTERIZED_TEX T_DISABLE
Not selectable by
customer.
Eleview Text Offset X ELEVIEW_TEXT_OFFSET_X
Not selectable by
customer.
Eleview Text Offset Y ELEVIEW_TEXT_OFFSET_Y
Not selectable by
customer.
Eleview Minimum
Text Enable
ELEVIEW_MIN_TEXT_ENABLE
Not selectable by
customer.
Alerting Obstacle Size ALERTING_OBSTACLE_SIZE
Not selectable by
customer.
Non-Alerting Obstacle
Size
NON_ALERTING_OBSTACLE_SIZE
Not selectable by
customer.
Modified Eleview
Logic
MODIFIED_ELEVIEW_LOGIC
Not selectable by
customer.
NOTE:
These items should not be modified by the operator without further review from the
certification authorities.
(3) Programmable Digital Input/Output Pins
(a) ARINC 429 signals
The T
3
CAS Circuit Card supports up to 40 ARINC 429 receivers.
Additionally, 18 ARINC 429 transmitters are supported.
The ARINC 429 definition for the Source Destination Identifier Bits are
shown in Table 4-9.
Table 4-9: Source Destination Identifier (SDI)
BITS
Meaning
10
9
0
0
All-Call
0 1 Installation #1
1 0 Installation #2
1
1
Installation #3
Pub. No. 8600200-001, Revision 004
34-45-29
4-109
04 Nov 2014
Use or disclosure of information on this page is subject to the restrictions in the proprietary notice of this document.