User's Manual

Table Of Contents
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
T
3
CAS/Part No.9005000
Table 6-8: Table of ACD Enumerated Values (cont)
ACD Discrete Option
ACD Enumerated
Option Bit Position
ACD Selectable Option
OCPA Mode A Warning
Hex Char 4
1 = “OBSTACLE AHEAD PULL-UP“
2 = “OBSTACLE OBSTACLE PULL-
UP PULL-UP”
3 = “~~PULL UP”
“~~” Designates a pair of constantly
varying tones from 400 to 800 Hz.
The tones are 0.3 sec each,
separated by 0.1 sec and followed by
0.1 sec of silence.
OCPA Mode B Warning
Hex Char 5
1 = “Avoid Obstacle”
Alerting Obstacle Size
Hex Char 6
0 = 16 pixel alerting obstacles
1 = 32 pixel alerting obstacles
Non Alerting Obstacle Size
Hex Char 7
0 = 16 pixel non-alerting obstacles
1 = 32 pixel non-alerting obstacles
The Maintenance ACD Options Page 17/25 displays the ACD Volume Level Options, as
shown in Figure 6-41. The correlations table for the displayed volume level values is
shown in Table 6-9. In the example shown in Figure 6-41, the volume levels are set to a
maximum value of 255.
Figure 6-41: ACD Option Page (Page 17/25) - Volume Level Options
Table 6-10: Table of Volume Level Values (for Page 17/25 and 18/25)
ACD Volume Option
Range
High-Impedance Volume Level
0 ≤ X ≤ 255
Low-Impedance Volume Level
0 ≤ X ≤ 255
Mode 6 High-Impedance Volume Level
0 ≤ X ≤ 255
Mode 6 Low-Impedance Volume Level 0 ≤ X ≤ 255
6-50
04 Nov 2014
34-45-29
Pub. No. 8600200-001, Revision 004
Use or disclosure of information on this page is subject to the restrictions in the proprietary notice of this document.