User's Manual

SYSTEM DESCRIPTION AND INSTALLATION MANUAL
T
3
CAS/Part No.9005000
Table 1-12: Thales VSI-TCAS Display Part Numbers
PART NUMBER
HARDWARE VERSIONS
SOFTWARE VERSIONS
Range via ARINC 3-5-10 NMI
Range via ARINC 6-12-24 NMI
X
Range via ARINC 3, 5, 6, 10, 12, 14, 15, 20, 40, 80, 120 NMI
X
Range via button 6-12 NMI
X
X
Range via button 4-8-16 NMI
X
Range via ARINC 5-10-20 NMI
X (1)
Range via ARINC 5, 6, 10, 12, 20, 40 NMI
X (1)
X (1)
ABV/NORN/BLW via ARINC
X
X
X
X
X
X
ABV/NORN/BLW via button
X
Absolute altitude via ARINC
X
X
X
X
X
Vertical Speed in metric units (M/S)
X
TCAS Extended Test normal
X
X
X
X
X
X
TCAS Extended Test normal + text display mode
X
X
Specific Symbology
(2)
(3)
(4)
(5)
Note
[1]
Only when instrument is pin-programmed for operation in TCAS TRAFFIC DISPLAY only
[2]
Specific symbology for “don’t climb” and “don’t descend” RA’s, V/S failure with background instead of yellow
[3]
V/S pointer shorter and thicker. Traffic range version 8 NMI when in TCAS self-test.
[4]
ABV (above) or BLW (below) message on the display when one of these modes are selected by A/B push-button on bezel
[5]
This version is only for TCAS 1 operation (no RA DISPLAY, TCAS validity discrete output is relative to Traffic instead of RA,
No ABV/BLW message displayed
[6]
Dedicated software for ACSS (formerly Honeywell)
[7]
This SW version replaces the previous version “1311”, “1312”, “0911”, “1100” and “2000”
1-22
04 Nov 2014
34-45-29
Pub. No. 8600200-001, Revision 004
Use or disclosure of information on this page is subject to the restrictions in the proprietary notice of this document.