User's Manual

SYSTEM DESCRIPTION AND INSTALLATION MANUAL
T
3
CAS/Part No.9005000
INTRODUCTION
1. General
This manual provides general system installation and maintenance instructions and theory of
operation for the T
3
CAS Integrated Platform. It also provides interface information and
interconnect diagrams to permit a general understanding of the overall system.
The purpose of this manual is to help install, operate, maintain and troubleshoot the T
3
CAS
Integrated Platform in the aircraft. Common system maintenance procedures are not presented in
this manual. The best established shop and flight line practices should be used.
NOTE:
This article meets the minimum performance and quality control standards required
by a technical standard order (TSO). If you are installing this article on or in a specific
type or class of aircraft, you must obtain separate approval for installation.
2. Reference Documents
Publications on subsystems installed as part of the T
3
CAS Integrated Platform are identified in
the list that follows:
Document Title
ACSS
Publication
Number
Mode S Data Link Transponder System Description and Installation
Manual
A09-3839-001
RCZ-852 Mode S Transponder System Description and Installation
Manual
A15-3851-001
Handling, Storage, and Shipping Procedures Instruction Manual for
Avionics Equipment
A09-1100-001
3. Weights and Measures
Weights and measurements in this manual use both U.S. and S.I. (metric) values.
Pub. No. 8600200-001, Revision 004
34-45-29
INTRO-1
04 Nov 2014
Use or disclosure of information on this page is subject to the restrictions in the proprietary notice of this document.