User Instructions

SECURITY NOTATION SPEC
NO.
IT4061400-907
SEE PAGE INDEX
FOR THIS SHEET
REV LETTER
CAGE
CODE
58960
REV LTR
SEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.
REV TEST SPECIFICATION PROCEDURE SPECIFICATION
LTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITS
AW/CRITICAL NOTATION
SUPPLEMENTS
87
SECURITY NOTATION PAGE
15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.
ENGINEERING
SPECIFICATION
Return P4 to full
amplitude (0 attenuation).
S-1403
P4:CAL
Return P4 to full
amplitude.
22 MODE S SPR POSITION
TOLERANCE
MODE S SPR POSITION
TOLERANCE
Perform test setup in
accordance with tables 1
and 5.
Perform test setup in
accordance with tables 1
and 5.
Interrogate the UUT with a
Mode S UF 5 interrogation
at the standard rate and
power.
ATC-1400A
PRF 0045
RF Lvl: -50
On the ATC-1400A, adjust
the PRF thumbwheels to
45 Hz.
Use the following table to
vary the position of the
SPR. The resulting %
Mode S reply shall be as
shown.
S-1403
FUNC 2,
SPR,
Dv = as
indicated
ATC-1400A
CW/NORM/
OFF: NORM
Use the following table to
move the SPR from its
nominal position. (Vary
the SPR Dv field of the
S-1403.) The resulting %
Mode S reply shall be as
shown. Read the % reply
on the ATC-1400A.
22.1 <10%
>90%
>90%
<10%
SPR Deviation
+0.25 µs
+0.05 µs
-0.05 µs
-0.25 µs
SPR Deviation
+0.25 µs
+0.05 µs
-0.05 µs
-0.25 µs
<2%
>98%
>98%
<2%