User Instructions

ManualsBrandsACSS an L-3 Communications and Thales ManualsElectronicsMode S Transponder

SECURITY NOTATION SPEC

NO.

IT4061400-907

SEE PAGE INDEX

FOR THIS SHEET

REV LETTER

CAGE

CODE

58960

REV LTR

SEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.

REV TEST SPECIFICATION PROCEDURE SPECIFICATION

LTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITS

AW/CRITICAL NOTATION

SUPPLEMENTS

SECURITY NOTATION PAGE

15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.

ENGINEERING

SPECIFICATION

16 ATCRBS ONLY ALL-

CALL, SHORT P4

POSITION

ATCRBS ONLY ALL-

CALL, SHORT P4

POSITION

Perform test setup in

accordance with tables 1

and 5.

Perform test setup in

accordance with tables 1

and 5.

Interrogate the UUT with

an ATCRBS Mode A

interrogation with short P4

of adjustable position.

Interrogate at the

standard rate.

ATC-1400A

PRF: 0450

SLS/ECHO:

OFF

XPDR MDE A

Turn PRF thumbwheels to

450 Hz. Turn SLS/ECHO

switch to OFF position.

Turn the XPDR MODE

CNTL to the MODE A

position.

S-1403

FUNC 3,

(ACS,A)

P4:CAL,

Dv = 0

Select FUNC 3 (ACS).

Within the FUNC 3 menu,

select ACS, A and

P4:CAL.

Adjust the position of the

P4 pulse on S-1403 as

shown in the table below.

P4 Dv indicates the

amount by which the P4

position will move from

nominal. The % ATCRBS

reply for each position

shall be as shown.

ATC-1400A

CW/NORM/

OFF: NORM

On the S-1403, adjust the

position of the P4 pulse as

shown in the table below.

P4 Dv indicates the

amount by which the P4

position will move from

nominal. The % ATCRBS

reply for each position

shall be as shown. (Read

the % reply display on the

ATC-1400A.)

16.1 <10%

>90%

<10%

>90%

P4 Dv

0µs

+0.3 µs

+0.05 µs

-0.05 µs

-0.3 µs