User Instructions

SECURITY NOTATION SPEC
NO.
IT4061400-907
SEE PAGE INDEX
FOR THIS SHEET
REV LETTER
CAGE
CODE
58960
REV LTR
SEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.
REV TEST SPECIFICATION PROCEDURE SPECIFICATION
LTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITS
AW/CRITICAL NOTATION
SUPPLEMENTS
75
SECURITY NOTATION PAGE
15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.
ENGINEERING
SPECIFICATION
15.4 >90%
ID = 7777
Observe the % ATCRBS
reply. The value shall be
as specified. Data shall
be as specified.
ATC-1400A
CW/NORM/
OFF: NORM
Read the % reply display
on the ATC-1400A. The
display shall indicate as
specified. Data shall be
as specified.
>98%
ID = 7777
Reply Rate Limit
Reply Rate Limit
15.5 N/A Interrogate the UUT with
an ATCRBS Mode A
interrogation at a rate of
1500 per second.
ATC-1400A
XPDR MDE A
PRF: 1500
On the ATC-1400A, turn
the XPDR MODE knob to
the A position. Adjust the
PRF thumbwheels to 1500
Hz.
N/A
S-1403
FUNC 1
On the S-1403, select
FUNC 1 (ATCRBS).
15.6 >34% Observe and record the %
ATCRBS reply. The value
shall be as specified.
ATC-1400A
CW/NORM/
OFF: NORM
Read and record the %
reply display on the
ATC-1400A. The display
shall indicate as specified.
43 to 46%
ATCRBS SLS
Characteristics
ATCRBS SLS
Characteristics
15.7 N/A Perform test setup in
accordance with tables 1
and 5.
Perform test setup in
accordance with tables 1
and 5.
N/A
Amplitude
Amplitude
15.8 N/A Interrogate the UUT with
an ATCRBS Mode C
interrogation with P2 SLS
pulse of adjustable
amplitude. Interrogate at
the standard rate.
ATC-1400A
XPDR MDE C
PRF: 0450
SLS/ECHO:
-0, ON
Turn XPDR MODE control
to MODE C position.
Turn PRF thumbwheels to
450 Hz.
Turn SLS/ECHO switch to
ON position.
N/A
Use the following table to
adjust the interrogation
RF level. The % ATCRBS
reply for each case shall
be as specified.
ATC-1400A
CW/NORM/
OFF: NORM
Use the following table to
adjust the interrogation
RF level. The % ATCRBS
reply for each case shall
be as specified.