User Instructions

SECURITY NOTATION SPEC
NO.
IT4061400-907
SEE PAGE INDEX
FOR THIS SHEET
REV LETTER
CAGE
CODE
58960
REV LTR
SEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.
REV TEST SPECIFICATION PROCEDURE SPECIFICATION
LTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITS
AW/CRITICAL NOTATION
SUPPLEMENTS
74
SECURITY NOTATION PAGE
15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.
ENGINEERING
SPECIFICATION
Burst Burst
15.1 N/A Interrogate the UUT with a
burst of 120 ATCRBS
Mode A interrogations at a
rate of 1200 per second
and power of -30 dBm.
ATC-1400A
CW/NORM/
OFF: OFF
XPDR MDE A
PRF: 1200
RF Lvl: -30
Turn XPDR MODE control
to MODE A position.
Turn PRF thumbwheels to
1200 Hz.
Turn RF LEVEL knob to
-30 dBm.
N/A
S-1403
FUNC 7,
ATC, 120
ATC-1400A
CW/NORM/
OFF: NORM
Select FUNC 7 (BURST).
Using the cursor keys and
slew knob, change the
fields in the FUNC 7 menu
as follows: FUNC 7 ATC
120.
S-1403
Press BURST
On the S-1403, press the
BURST key to initiate the
interrogations.
15.2 >90% Observe the % ATCRBS
reply. The value shall be
as specified.
Read the ATCRBS %
reply display on the
S-1403. The display shall
indicate as specified.
>98%
Continuous
Continuous
15.3 N/A Interrogate the UUT with
an ATCRBS Mode A
interrogation at a rate of
500 per second.
ATC-1400A
XPDR MDE A
PRF: 0500
On the ATC-1400A, turn
the XPDR MODE knob to
the A position. Adjust the
PRF thumbwheels to 500
Hz.
N/A
S-1403
FUNC 1
On the S-1403, select
FUNC 1 (ATCRBS).