User Instructions

SECURITY NOTATION SPEC
NO.
IT4061400-907
SEE PAGE INDEX
FOR THIS SHEET
REV LETTER
CAGE
CODE
58960
REV LTR
SEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.
REV TEST SPECIFICATION PROCEDURE SPECIFICATION
LTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITS
AW/CRITICAL NOTATION
SUPPLEMENTS
69
SECURITY NOTATION PAGE
15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.
ENGINEERING
SPECIFICATION
11.7 -76 ± 4 dBm Slowly decrement the
interrogation level in 1-dB
steps until the % reply is
less than 90%, then
increment by 1 dB. The
interrogation level shall be
as specified. Record the
value.
Slowly decrement the RF
LEVEL knob on the
ATC-1400A in 1-dB steps
until the % reply indicates
less than 90%, then
increment the RF level by
1 dB. The RF level shall
indicate as specified.
Record the value.
-76 ± 4 dBm
Return the interrogation
level to -50 dBm.
ATC-1400A
RF Lvl: -50
Set ATC-1400A RF level
to -50 dBm.
Return the interrogation
frequency to 1030.0 MHz.
DSPLY SEL:
FREQ
Turn thumbwheels on
FREQ SELECT and
DELTA F until FREQ
DISPLAY indicates
1030.00 MHz.
ATCRBS Reply
Frequency
ATCRBS Reply
Frequency
11.8 N/A Change the 429 Cntl Data
B source to provide an all
1s (7777) Mode A reply
with SPI (ident).
Cntl Data B
429 source
settings
SPD: low
PAR: odd
RATE:
168 ms
LBL: 016
DATA:
1FFE48
Change the 429 Cntl Data
B source to provide an all
1s (7777) Mode A reply
with SPI (ident).
N/A
11.9 1090 ± 1
MHz
Measure and record the
reply frequency.
Frequency shall be as
specified.
ATC-1400A
XPDR MDE A
Observe the XMTR FREQ
display on the
ATC-1400A. Display shall
indicate as specified.
Record the value.
1090 ± 1
MHz
ATCRBS Reply Delay
ATCRBS Reply Delay
11.10 N/A This test measures the
reply delay.
N/A