User Instructions

SECURITY NOTATION SPEC
NO.
IT4061400-907
SEE PAGE INDEX
FOR THIS SHEET
REV LETTER
CAGE
CODE
58960
REV LTR
SEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.
REV TEST SPECIFICATION PROCEDURE SPECIFICATION
LTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITS
AW/CRITICAL NOTATION
SUPPLEMENTS
68
SECURITY NOTATION PAGE
15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.
ENGINEERING
SPECIFICATION
11.5 N/A Disable interrogations and
turn off the UUT.
ATC-1400A
CW/NORM:
OFF
Turn CW/NORM/OFF
switch to OFF position on
the ATC-1400A and turn
off the UUT.
N/A
Reverse the antenna
cables connected to the
Mode S test equipment.
Reverse the antenna
cables connected to the
IFR ANT A and ANT B
ports.
Turn on the UUT. Turn on UUT.
Interrogate the UUT with
an ATCRBS Mode C
interrogation at the
standard rate.
ATC-1400A
XPDR MDE C
CW/NORM:
NORM
Turn XPDR MODE control
to MODE C position,
CW/NORM/OFF to
NORM.
Set the interrogation
frequency to 1030.2 MHz.
ATC-1400A
DSPLY SEL:
FREQ
FREQ and
DELTA F: as
required
Turn thumbwheels on
FREQ SELECT and
DELTA F until FREQ
DISPLAY indicates
1030.20 MHz.
Set the interrogation level
to -70 dBm.
ATC-1400A
RF Lvl: -70
Set ATC-1400A RF level
to -70 dBm.
11.6 7710 Observe the altitude code
returned by the UUT.
Code shall be as
specified.
ATC-1400A
DSPLY SEL:
XPDR CODE
Observe the XPDR CODE
display. Display shall
indicate as specified.
7710