User Instructions

SECURITY NOTATION SPEC
NO.
IT4061400-907
SEE PAGE INDEX
FOR THIS SHEET
REV LETTER
CAGE
CODE
58960
REV LTR
SEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.
REV TEST SPECIFICATION PROCEDURE SPECIFICATION
LTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITS
AW/CRITICAL NOTATION
SUPPLEMENTS
65
SECURITY NOTATION PAGE
15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.
ENGINEERING
SPECIFICATION
11 ATCRBS MTL, REPLY
FREQUENCY, DELAY,
AND POWER
ATCRBS MTL, REPLY
FREQUENCY, DELAY,
AND POWER
Perform test setup in
accordance with tables 1
and 5, except set CNTL
DATA B source as shown.
CNTL DATA B
429 source
settings
SPD: low
PAR: odd
RATE:
168 ms
LBL: 016
DATA:
007E38
Perform test setup in
accordance with tables 1
and 5, except set CNTL
DATA B source as shown.
S-1403
FUNC 1
Remove the emulation
system from the UUT.
Turn on the UUT.
Remove the HP 64000
emulation system by
performing the following
steps:
1. Type "END" on the HP
64000 keyboard.
2. Turn off UUT.
3. Remove UDE
connector from the
UUT.
4. Turn on UUT.
Interrogate the UUT with
an ATCRBS Mode A
interrogation at the
standard rate.
ATC-1400A
XPDR MDE A
PRF: 0450
Turn XPDR MODE control
to MODE A position. Turn
PRF thumbwheels to 450
Hz.
ATCRBS MTL at
1029.8 MHz
ATCRBS MTL at
1029.8 MHz
11.1 N/A Set the interrogation
frequency to 1029.8 MHz.
ATC-1400A
DSPLY SEL:
FREQ
FREQ and
DELTA F: as
required
Turn thumbwheels on
FREQ SELECT and
DELTA F until FREQ
DISPLAY indicates
1029.80 MHz.
N/A
Set the interrogation level
to -70 dBm.
ATC-1400A
RF Lvl: -70
Set ATC-1400A RF level
to -70 dBm.