User Instructions

SECURITY NOTATION SPEC
NO.
IT4061400-907
SEE PAGE INDEX
FOR THIS SHEET
REV LETTER
CAGE
CODE
58960
REV LTR
SEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.
REV TEST SPECIFICATION PROCEDURE SPECIFICATION
LTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITS
AW/CRITICAL NOTATION
SUPPLEMENTS
53
SECURITY NOTATION PAGE
15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.
ENGINEERING
SPECIFICATION
Xmtr 0/Rcvr 1 Xmtr 0/Rcvr 1
9.4 N/A (MAINT DATA OUT/AIR
DATA 2)
(MAINT DATA OUT/AIR
DATA 2)
N/A
Perform initial setup in
accordance with table 7.
Perform initial setup in
accordance with table 7.
Modify receiver label:
Address Data
0D222H FFAAH
Enter "modify memory
0D222H to FFAAH"
Modify transmitter data:
Address Data
0D210H AAAAH
0D211H AAAAH
Enter "modify memory
0D210H thru 0D211H to
AAAAH"
Enter "display memory
0D202H thru 0D203H"
Data should read as
follows:
Data should read as
follows:
Address
Address
9.5 AAAAH
2AAAH
0D202H
0D203H
0D202H
0D203H
AAAAH
2AAAH
On Mode S interface
panel, remove
connections on 429 ADC
#2 and reconnect on 575
ADC #2.
On Mode S interface
panel, remove
connections on 429 ADC
#2 and reconnect on 575
ADC #2.
Modify receiver label:
Address Data
0D222H FF55H
Enter "modify memory
0D222H to FF55H"
Modify transmitter data:
Address Data
0D210H 5555H
0D211H 5555H
Enter "modify memory
0D210H thru 0D211H to
5555H"
Enter "display memory
0D202H thru 0D203H"
Data should read as
follows:
Data should read as
follows: