User Instructions

SECURITY NOTATION SPEC
NO.
IT4061400-907
SEE PAGE INDEX
FOR THIS SHEET
REV LETTER
CAGE
CODE
58960
REV LTR
SEE THE TITLE PAGE FOR PROPRIETARY AND DATA RIGHTS NOTATIONS.
REV TEST SPECIFICATION PROCEDURE SPECIFICATION
LTR NO. OPR LIMITS C TEST DESCRIPTION SWITCH POS C WORK STEPS MFG LIMITS
AW/CRITICAL NOTATION
SUPPLEMENTS
A
-7
SECURITY NOTATION PAGE
15101-000 (REV 970213 BCAS ASF5900/ENG_SPEC.DOT) (REV 07/18/2000 -OFC97-DATA SERVICES) HONEYWELL INTERNATIONAL INC.
ENGINEERING
SPECIFICATION
Write the LRU dash and
serial numbers, in ISO-5
format, to the EEPROM
locations 9FCOH to
9FCAH.
A3.2 5041
5353
Enter "display memory
MDS word from 0#20010
to 0#20011"
The memory locations
shall be as indicated.
5041
5353
A3.3 PASS Verify that each 8-bit word
in locations 9FCOH thru
9FCAH contains the
proper dash and serial
numbers.
Enter "display memory
MDS word from 1#9FC0
to 1#9FCA"
Verify that the 8 bits for
each word are as follows:
- Lower 4 bits from the
serial number and dash
number of the UUT.
- Upper 4 bits contain a
3 Hex.
PASS
Enter "END"
Enter "SCP MDS"