Operation Manual

1
ENGLISH
NO KEY FUNCTION
1. ON/OFF On/Off the unit with overriding all the timer settings
2. SLEEP Activate/deactivate Sleep function
3. FAN Select Fan speeds control (Auto/High/Med/Low)
4. MODE Select operating Modes control (Cool/Heat/Auto/Dry/Fan)
The Auto mode is unavailable for Chilled Water System
5. SET TEMP UP Increase set temperature in °C or °F
6. SET TEMP DOWN Decrease set temperature in °C or °F
7. SWING Activate/deactivate Swing control
8. ON TIMER Enable/disable the Event 1, 2 and 3 ON TIMER setting mode
9. OFF TIMER Enable/disable the Event 1, 2 and 3 OFF TIMER setting mode
10. TIMER ACTIVE Activate/deactivate all set timers
11. CLOCK Enable/disable the Real Time Clock (RTC) setting mode
12. DAY a) Select the day for RTC or timer setting
b) Enable/disable FAN Key lock
13. HOUR a) Select the hour for RTC or timer settings
b) Set Override function for 1, 2 or 4 hours
14. MINUTE a) Select the minute for RTC or timer settings
b) Enable/disable key lock
1.0 OPERATING GUIDE
There are all together 14 keys on the Netware 3 wired controller.
Note : Override Function
Press the HOUR key once will activate the override function for 1 hour. An indicator “H1” will show
on the top left corner of the LCD. Press the same key again will increase the setting to 2 hours. An
indicator “H2” will be shown. Press the 3rd times increase the setting to 4 hours. An indicator “H4”
will be shown. Subsequent press will deactivate the override function.
When the Override function is activated, all the timers will bypassed and turn ON the unit for a fix
periods of 1 hour, 2 hours or 4 hours depends on the selection, after which it will turned off.
1 OM-NET3-0808_EN 9/5/08, 12:00 PM1