Specifications

41
1. “ON/OFF” switch
x Press to start the air conditioner unit.
x Press again to stop the unit.
2. Temperature setting
x Set the desired room temperature.
x Press button to increase or decrease the set
temperature. Setting range are between 16
°C
to 30°C (60°F to 80°F).
3. Operation Modes
x Press the “mode” button for select the type of
operating mode.
- Cooling Only :
COOL, DRY, FAN
- Heat Pump :
AUTO, COOL, DRY, HEAT, FAN
(AUTO mode is represented by bothCOOL and
HEAT LED light on)
4. Fan Speed selection
x Press the button until the desired fan speed is
achieved.
5. Timer
x Press the set button to select the switch timer
of the air conditioner unit (the setting range is
between 1 to 10 hours).
6. “Sleep” mode
x Press button to activate the sleepfunction can
only be activated under “cool” or heating mode
operation. When it is activated under “cool”
mode operation, the set temperature will
increase 0.5
°C after 30 minutes, 1°C after 1 hour
and 2°C after 2
hours. If it is actiaved under
“HEAT” mode operation, the set temperature
will be descreased 0.5
°C after 30 minutes, 1°C
after 1 hour and 2°C after 2 hours.
7. Air Swing
x Press button to activate the automatic air swing
function.
8. Sensor
x Infra red sensor to receive signals from wireless
controller.
9. LED Display
x To display the set temperature (in
°C) and timer
delay setting (in hours).
10. Transmission source
x To transmit signals to the air conditioner.
SLM AC-5300 (OPTIONAL)