Specifications

CEILING CONVERTIBLE
D SERIES
R5CM 40/50 D/DR
R5CM 62 C/CR
Cooling:
33000 Btu/h - 55000 Btu/h
9.67 kW - 16.12 kW
Heating:
33000 Btu/h - 55000 Btu/h
9.67 kW - 16.12 kW
14
Choices Of Wired And Wireless Controller
R5CM 40/50 D/DR
A5LC 61 C/CR
R5CM 62 C/CR (Ceiling Exposed only)
G8 Handset AC-5300 Wireless
Controller
(Optional)
SLM 3
Wired Controller
A5LC 35/40/50 C/CR
Ceiling And Floor Installing Option **
The unit is designed with possibility to be installed under the
ceiling or sitting on the floor to suit any interior design
requirements.
Auto Random Restart
When there is power failure occurs during operation, the
unit will automatically restart as the last setting condition
when the power is resumed. Option is provided to cancel
this feature.
Automatic Air Swing**
The swing mode enables the air flow to be evenly distributed
into the room from the front discharge area.
NIM – Able
The R5CM range of product is able to communicate with the
versatile NIM networking control module and offers the
opportunity of one centralized control for a systems of
multiple indoor units in a building.
Auto Mode
Auto Mode allows the setting to change automatically
between cool and heat mode depending on the room
temperature and the set temperature required.
Self Diagnosis
This feature helps to detect any faults or malfunctioning
in the system and give user a warning by blinking of the
LED lights.
Two Way Air Discharge**
Equipped with two way air
discharge, at front and bottom
discharge; to provide better air
distribution, for both cooling
and heating effect.
During heat mode hot keep cycle, the fan will run at low
speed during the thermostat cycle off. As a result, one will
not feel the draft of cold air discharge from the unit. Option
of fan stop or fan run at specific interval timing can also be
selected.
Hot Keep Cycle
**
Applicable for R5CM-D/DR series only.
Saranet Air Filter
The anti fungus air filter removes air-particles from the air.
Dust