Specifications
Product and Service Guide version 3.9 June 2005
2.2.11 AC1030 / AC1038 / AC1080 Reader Chipset
AC1030 chipset is used in the ACR30 smart card reader series.
Features
ISO 7816 compatible smart card interface
Supports most common memory-based smart cards (SLE4406, SLE4418/4428, SLE4432/4442 and I2C cards
with memory 1k-16k bits)
Supports CPU-based cards with T=0, T=1 protocol
Automatic detection memory-based card or MCU-based card
Power up/down sequence compatible to ISO 7816 for signal integrity
Automatic detection of card insertion and removal
Serial or USB (low speed at 1.5Mbps) interface to host computer with simple command structure
34-Pin SOIC for AC1030
Operating temperature range: 0
o
C to 70
o
C (AC1030)
Power supply at 4.0V – 5.25V
AC1038 chipset is used in the ACR38 smart card reader series.
Features
ISO 7816 compatible smart card interface
Supports most common memory-based smart cards (SLE4418/4428, SLE4432/4442, I2C cards with memory
1k-1024k bits, AT88SC1608 and AT88SC153)
Supports CPU-based cards with T=0, T=1 protocol
Supports CPU-based cards with voltage 1.8V, 3V and 5V
Automatic detection memory-based card or MCU-based card
Power up/down sequence compatible with ISO 7816 for signal integrity
Automatic detection of card insertion and removal
USB (full speed at 12Mbps) interface to host computer with simple command structure
24-Pin SOIC for AC1038
Operating temperature range: 0
o
C to 70
o
C (AC1038)
Power supply at 4.0V – 5.25V
AC1080 reader chipset is used in the ACR80 smart card reader with pin-pad.
Features
Multiple-slot (4 slots) smart card reader co-processor
Optional features for keypads, LCD display and magnetic stripe reader, all-in-one chip
A serial TTL or USB interface is provided, with communication protocol made available to allow the developer
to have full control of all resources supported by AC1080, i.e. smart cards, keypads, displays and magnetic
stripe reader
AC1080 supports T=0, T=1 smart cards, memory card SLE4418/4428, SLE4432/4442
Current firmware has been certified for EMV Level 1.
* Note that AC1030 / AC1038 / AC1080 are the product numbers used by ACS and they will not be printed on the reader
chipset.
Advanced Card Systems Ltd.
Unit 2910-2913, 29/F, The Center
99 Queen’s Road Central, Hong Kong
Tel: +852 2796 7873 Fax: +852 2796 1286
Website: www.acs.com.hk Email: info@acs.com.hk
Advanced Card Systems Ltd. Page 17 of 45