Installation guide

ACS Synchronous API Driver (Proprietary Driver) Installation
B. ACS Synchronous API driver (Proprietary Driver) Installation
B.1 Windows XP/2000
1. Run the driver “SETUP.EXE” and the “Proprietary
Driver Installation Wizard” window will open, click
“INSTALL”.
To check the driver version or read installation tips, click
on “VIEW README”.
2. When prompted whether you want to install the
drivers, click “Yes”.
3. Please disconnect the reader from your PC if you
haven’t done so.
Then click “OK”.
4. Connect the ACR38 device into an available USB
port. The Found New Hardware dialog will appear at the
bottom right corner. Do NOT click “OK” until the dialog
disappears.
5. Choose “Install the software automatically
(Recommended)” option. Then click “Next >”.
ACR38 Series Installation Guide Page 9 of 17
Advanced Card Systems Ltd.
Unit 1008, 10th Floor
Hongkong International Trade and Exhibition Centre
1 Trademart Drive
, Kowloon Bay, Hong Kong
Tel: [phone] Fax: [phone]
Website: www.acs.com.hk Email: [e-mail]